Napco Security Technologies GEM-P3200 quick start Zone Options / Zones 33 48 Address 1602

Page 32 WI818G 10/05

ZONE OPTIONS / ZONES 33 - 48 (ADDRESS 1602 -1786)

ZONE OPTIONS / ZONES 33-48

				ZONES 33			40						ZONES 41			48
ZONE OPTIONS	ADDR	Z33	Z34	Z35	Z36	Z37	Z38	Z39	Z40	ADDR	Z41	Z42	Z43	Z44	Z45	Z46	Z47	Z48
		1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8
Priority	1602									1702
Priority with Bypass	1603									1703
Auto-Bypass	1604									1704
Selective Bypass	1605									1705
Keyswitch Arming	1606									1706
Auto-Bypass Re-entry	1607									1707
Pre-Alarm Warning	1608									1708
Never Arm	1609									1709
24-Hour Zone	1610									1710
Burg. Alarm Output	1611									1711
Pulsed Alarm Output	1612									1712
Fire Output (Lug E9)	1613									1713
Reset Relay	1614									1714
Auxiliary Relay	1615									1715
Entry/Exit 1	1616									1716
Entry/Exit 2	1617									1717
Exit/Entry Follower	1618									1718
Auto Reset	1619									1719
Swinger Shutdown	1620									1720
Chime	1621									1721
Abort Delay	1622									1722
Power-up Delay	1623									1723
Day Zone Open	1624									1724
Day Zone Short	1625									1725
Alarm on Day Zone	1626									1726
RPT Alarm Tel 1	1627									1727
RPT Alarm Restore Tel 1	1628									1728
RPT Trouble Tel 1	1629									1729
RPT Trouble Restore Tel 1	1630									1730
RPT Alarm Tel 3	1635									1735
RPT Alarm Restore Tel 3	1636									1736
RPT Trouble Tel 3	1637									1737
RPT Trouble Restore Tel 3	1638									1738
No EOL Resistor	1639									1739
Sensor Watch	1640									1740
Trouble on Open	1641									1741
Trouble on Short	1642									1742
Trouble on Night Open	1643									1743
Zone Area 1	1644									1744
Zone Area 2	1645									1745
RESERVED	1653									1753
Zone ANDing Group 1	1654									1754
Zone ANDing Group 2	1655									1755
Interior #1 Bypass	1662									1762
Interior #2 Bypass	1663									1763
Keypad Sounder on Alarm	1664									1764
Fire (C)	1675									1775
Fire Alarm Verification (C)	1676									1776
Interior (STAY) Bypass	1684									1784
Chime 2	1686									1786

When the Easy Program Menu is used, these features are enabled by default (for new panels or after a Cold Start (address 4093)). Do not program if "K Series" keypads (with "P" and "Q" buttons) are used in the system.

Disable Auto-Reset on non-fire zones for SIA CP-01 installations.

In UL installations, all Fire Zones must also be programmed for "Pulse Burg Output Cadence" (Address 2422, press 1 (bit zero)).

See Zone Options on Page 33.

XGEM-P3200 Programming Instructions LNAPCO Security Systems