NCR 7870 manual Changing the Good Read Tone

6-10 Chapter 6: Operation

Changing the Good Read Tone

The volume of the Good Read Tone can be changed while in normal operating mode. This is the only characteristic of the tone that can be changed without being in Programming Mode.

Instructions

1.Scan the Volume Adjustment tag and listen to the tone.

2.If the tone is not loud enough, scan the tag again. Repeat if necessary.

3.If the tone is too loud, scan the tag repeatedly until the volume resets to the lowest level. Now scan to the desired level.

4.When the volume is acceptable, scan the Save and Reset tag to end. If the Save and Reset tag is not scanned, the unit will not operate.