NCR 7870 manual Terminal Coupon Interface Parameters, Hex a Hex B, Hex C Hex D, Hex E Hex F

Chapter 7: Programming 7-75

Terminal Coupon Interface Parameters

Certain parameters must be set to permit the unit to transmit coupon data to the host terminal. These are in addition to the general parameters that are required for other scanner/scale functions.

Note: Selection of optional add-on bar codes may require additional programming. See Early Beep Disable in the Special Programming section for more information.

The first part of setting the Coupon Interface Parameters is

Programming Multi-Symbol Scanning.

1.Scan the Programming Mode tag.

2.Scan the Hex 3 and Hex 8 tags to select this parameter.

3.Scan a Hex 0 through Hex F tag to set a Coupon Select 1 parameter.

Coupon Select 1 Parameter	Disable	Enable
Coupon with P5 optional	Hex 0	Hex 1
Coupon with 128 add-on optional	Hex 2	Hex 3
Coupon with 128 add-on mandatory	Hex 4	Hex 5
Markdown with 128 add-on optional	Hex 6	Hex 7
Program 1 with 128 add-on optional	Hex 8	Hex 9
Program 1 with 128 add-on mandatory	Hex A	Hex B
Program 2 with 128 add-on optional	Hex C	Hex D
Program 2 with 128 add-on mandatory	Hex E	Hex F

4. Scan the Save and Reset tag to save the program (required).