7-26 Chapter 7: Programming

There are 15 selections for this parameter option (2 through 16 characters). Scan the proper Hex tag (Hex 2 through Hex F) to enter your selection. The default is 4 characters.

Full ASCII

Code 39 permits full ASCII capability by encoding the additional characters. Disable this function by scanning the Hex 0 tag, and scan the Hex 1 tag to enable this function. Disable is the default.

Check Digit Present

The Check Digit Present parameter permits you to determine if the bar code must contain a correct check digit to be identified as valid. If this function is enabled, the bar code is ignored if a check digit is not present. Scan the Hex 0 tag to disable this option, or the Hex 1 tag to enable it. Disable is the default.

Transmit Check Digit

The Transmit Check Digit parameter selects whether to send the check digit to the host terminal. Scan the Hex 0 tag to disable this option, or the Hex 1 tag to enable it. The default is to disable sending the check digit.

Allow 1- or 2-Character Tags

The Allow One- or Two-Character Tags parameter selects whether or not to permit the scanner to read a one- or two-character Code 39 label. If your application does not require that the scanner read a one- or two-character Code 39 label, scan the Hex 0 tag to disable this option. If your application requires this capability, scan the Hex 1 tag to enable it. The default is to disable reading a one- or two-character Code 39 label.

Page 142
Image 142
NCR 7870 manual Full Ascii, Check Digit Present, Transmit Check Digit, Allow 1- or 2-Character Tags