NCR 7870 manual Programming

Chapter 7: Programming 7-71

Result: The scanner sounds the Good Read tone one time to indicate that the scanner accepted the multi- symbol label. If the multi-symbol label is already in the scanner's memory, the scanner then beeps twice for a 2- symbol label or three times for a 3-symbol label. A long, loud tone (error tone) indicates that the scanner's memory already has the maximum of five multi-symbol label combinations.

5.To program more labels, repeat Options C or D until a maximum of 5 label types (in any combination) have been scanned into memory.

6.Scan the Save and Reset tag to save the multi-symbol programming. The scanner should go through a sequence similar to a power up sequence.

7.Remove power from the NCR 7870 and connect the communications cable.