NCR 7870 manual Program Example, Version Number UPC-D Only

Chapter 7: Programming 7-37

Parameter	Default Value
UPC – A	41	(ASCII A)
UPC – D	44	(ASCII D)
UPC – E	45	(ASCII E)
EAN – 8	46	(ASCII F)
EAN – 13	47	(ASCII G)
Code 39	31	(ASCII 1)
Code 128	33	(ASCII 3)
Interleaved 2 of 5	32	(ASCII 2)

Note: If you use the same characters as in the Terminator Byte, the message may terminate too soon.

Version Number (UPC-D Only)

The Version Number parameter can be used only if you specified UPC- D as the bar code type. To include the Version Number in ASCII, scan the Hex 1 tag; scan the Hex 0 tag if you do not want to include the Version Number. The default is not to include it.

Program Example

Following is an example of a completed Label Identifiers programming worksheet. This example shows the following programmed selections.

•Identifier Type – Unique Prefix added to all bar code data messages

•Common Byte 1 – 5B ([)

•Common Byte 2 – 42 (B)

•Bar Code Type UPC-A

•Common Bytes – Common Byte 1

•Unique Identifier – 48 (H)