NCR 7870 manual Program Example, Tone Length Milliseconds, Tone On/Off, Tone Volume

Chapter 7: Programming 7-19

Tone Length (Milliseconds)

The Hex C tag permits you to set the length of the Good Read Tone by listening to it. Each time you scan the Hex C tag, the tone length changes from a minimum of 25 milliseconds to a maximum of 250, and then back again. End this mode by scanning the End tag or another valid Hex tag.

Tone On/Off

The Hex A tag sets the Tone On/Off programming mode, which offers two options, On and Off. The Hex 0 tag turns the Good Read tone off and the Hex 1 tag turns the Good Read Tone on. The default is to turn the Good Read Tone on.

Tone Volume

The Hex D tag permits you to select the volume of the Good Read tone by listening to it as you repeatedly scan the Hex D tag. End this mode by scanning the End tag or another valid Hex tag.

Program Example

Following is an example of a completed Good Read Tone programming worksheet. In this example, the only selection that can be made beforehand is the tone on/off, which is selected to be on. The other adjustments are selected by listening to the tone as you repeatedly scan the appropriate Hex tag.

Your Program

1 1

Good Read Tone

A

1

Tone

On/Off

B

B* *

Tone

Frequency

C D E

C*	D*		E*
		Not-On-File
Tone	Tone
Length	Volume	Tone Volume

* Scan Hex tag repeatedly for desired setting.

B052