When STATUS lamp is lighting in green:
Description | Action | ||
message | |||
|
| ||
Prepare To Boot | POST completes | This is not an error. | |
| normally. |
|
When STATUS lamp is off:
Description | Action | ||
message | |||
|
| ||
PCI Bus SERR 01 | A system error was | 1. Take one of the following measures to | |
| detected on chipset. | reboot (reset) the modular server. | |
PCI Bus SERR 07 | A system error was | * Issue an OS command. | |
| detected on LAN1 device. | * Press Ctrl + Alt + Del. | |
PCI Bus SERR 09 | A system error was | * Issue a command from Web browser of | |
| detected on LAN2 device. | EXPRESSSCOPE Engine or NEC | |
PCI Bus PERR 01 | A system error was | ESMPRO Manager. | |
| detected on chipset. | 2. Take one of the following measures to power | |
PCI Bus PERR 07 | A system error was | off the modular server and then on. | |
| detected on LAN1 device. | * Power off the modular server from OS, | |
PCI Bus PERR 09 | A system error was | then press the POWER/SLEEP switch to | |
| detected on LAN2 device. | power on. | |
|
| * Press the POWER/SLEEP switch to power | |
|
| off the modular server, then press it again | |
|
| to power on. | |
|
| * Issue a command from Web browser of | |
|
| EXPRESSSCOPE Engine or NEC | |
|
| ESMPRO Manager. | |
|
| 3. If the same error persists, contact your | |
|
| service representative. |