This section provides notes on using the modular server safely. Read this section carefully to ensure proper and safe use of the modular server. For symbols, see "SAFETY INDICATIONS" provided earlier.
WARNINGDo not use the modular server for services where critical high availability may directly affect human lives.
The modular server is not intended to be used with or control facilities or devices concerning human lives, including medical devices, nuclear facilities and devices, aeronautics and space devices, transportation facilities and devices; and facilities and devices requiring high reliability. NEC assumes no liability for any accident resulting in personal injury, death, or property damage if the modular server has been used in the above conditions.
Do not disassemble, repair, or alter the modular server.
Never attempt to disassemble, repair, or alter the modular server on any occasion other than described in this User's Guide. Failure to follow this instruction may cause an electric shock or fire as well as malfunctions of the modular server.
Do not remove the battery.
Your modular server contains the lithium and NiMH (or
Do not remove the battery. Placing the battery close to a fire or in the water may cause an explosion.
When the modular server does not operate appropriately due to the dead batteries, contact your service representative. Do not disassemble the modular server to replace or recharge the battery by yourself.
Do not use the modular server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the system and disconnect the power plug from the outlet, then contact your service representative. Using the modular server in such conditions may cause a fire.
Keep needles or metal objects away from the modular server.
Do not insert needles or metal objects into ventilation holes in the modular server. Doing so may cause an electric shock.
Use the devices only in the specified areas.
Modular servers should be installed in the dedicated Module Enclosure for their uses. Do not install the modular servers in a chassis other than the Module Enclosure. Failure to follow it may result in fire and/or electric shock to occur.