Upgrading Your Modular Server 8-9

Hard Disk Drive

The modular server can contain only one 2.5-inch SATA hard disk drives.

IMPORTANT:

„The hard disk drive is extremely sensitive to static electricity. Make sure to touch the metal frame of the cabinet to discharge static electricity from your body before handling the hard disk drive. Do not touch the terminals and parts on the hard disk drive by a bare hand and place the hard disk drive directly on the desk. For static notes, see the section "Anti-static Measures" described earlier.

„Do not use any hard disk drives not approved by NEC. If an unapproved third party's hard disk drive is installed on the modular server, not only the hard disk drive but also the modular server may be defected.

„Pay attention not to apply shock or vibration to the hard disk drive. Do not push the surface of the hard disk drive when installing or removing the hard disk drive. Doing so may cause a failure of the hard disk drive.