Keep the removed blank cover for future use.
Remove the blank cover from the target slot only.
3.Put the modular server on the clean, rigid and flat desk. Loosen the thumbscrew to open the lock lever.
Lock lever
IMPORTANT: The modular server contains a hard disk drive that is easily affected by the dust, water, shocks and vibrations. Take strict care to handle it.
4.Hold firmly the frame of the modular server so that the surface to connect a hard disk drive faces right and the card edge faces the Module Enclosure side.
IMPORTANT: Do not hold the lock lever. Doing so may cause the modular server to fall down or be damaged due to deformed lock lever.