4-4 Configuring Your Modular Server

Configuration Examples

The following describes examples of configuration required to use software-link features or for system operations.

Date and Time

To change system date or time

Select [Main] – [System Time] and [System Date].

Set the correct date and time before running the system.

Link with Management Software

To control power supply of the modular server with NEC ESMPRO Manager via the network

Select [Advanced] – [Advanced Chipset Control] – [Wake On LAN/PME] – [Enabled].

Boot

To change the boot order of devices connected to the modular server

Select [Boot] and specify the boot order.

To display POST check results

Select [Advanced] – [Boot-time Diagnostic Screen] – [Enabled].

You can also press Esc while the NEC logo is on the screen to display POST check results.

To use remote wake-up feature

„Via Modem:

Select [Advanced] – [Advanced Chipset Control] – [Wake on Ring] – [Enabled]

„Via LAN:

Select [Advanced] – [Advanced Chipset Control] – [Wake on LAN/PME] – [Enabled]

„Via RTC alarm:

Select [Advanced] – [Advanced Chipset Control] – [Wake on RTC Alarm] – [Enabled]

To control from the HW console

Select [Server] – [Console Redirection] and set each item.