8-6 Upgrading Your Modular Server

INSTALLATION/REMOVAL PROCEDURE

Install or remove the devices in the following procedure.

SO-DIMM

The SO-DIMM (Small Outline Dual Inline Memory Module) is inserted into the SO-DIMM socket on the modular server. The modular server has two SO-DIMM sockets. Install or remove two DIMMs one by one.

Install the SO-DIMM in SO-DIMM socket #1, then in socket #2.

NOTES:

„Up to 2GB memory can be added.

„The modular server requires at least one DIMM to operate.

IMPORTANT:

„The DIMM is easily affected by static electricity. Handle the DIMM after making your body contact with a metallic frame section of the cabinet to discharge the static electricity from your body. Do not make bare hands contact with terminals and components on the DIMM. In addition, do not put the DIMM on a desk directly. See "Static Precautions" for details of the static electricity.

„Do not use any DIMM not approved by NEC. If an unapproved third party's DIMM is installed in the modular server, not only the DIMM but also the modular server may be defected. You will be charged by any repair of a malfunction or defect caused by such a device within the warranty period.

SO-DIMM #2 SO-DIMM #1