Configuring Your Modular Server
IMPORTANT: Make sure to avoid any conflict in the interrupt requests or the base I/O addresses. If an assigned value is already used by another resource, it appears in yellow. Any yellow value must be re- assigned.
Option | Parameter | Description | Your Setting |
Serial Port B | Disabled | Specify whether serial port B is |
|
| [Enabled] | enabled or disabled. |
|
Base I/O Address | [3F8h] | Specify the base I/O address for |
|
| 2F8h | serial port B. |
|
| 3E8h |
|
|
| 2E8h |
|
|
Interrupt | IRQ 3 | Specify the interrupt request |
|
| [IRQ 4] | (IRQ) for serial port B. |
|
USB 2.0 Controller | Disabled | Specify whether the USB 2.0 |
|
| [Enabled] | controller is enabled or disabled. |
|
Serial ATA | Disabled | Specify whether the onboard |
|
| [Enabled] | SATA controller is enabled or |
|
|
| disabled. |
|
SATA AHCI | [Disabled] | The AHCI (Advanced Host |
|
|
| Controller Interface) is always |
|
|
| disabled on this system. This |
|
|
| option is view only. |
|
|
| This menu appears only when |
|
|
| [Serial ATA] is enabled. |
|
|
| [ | ]: |