General Description 2-3

NAMES AND FEATURES OF COMPONENTS

This section describes the names and features of the components in the device.

Front View

1

3

2

45

6

7

8

109

N8100-1635F XXXXXXX

N code

Serial number

Pull straight

Sliding tag

1POWER/SLEEP lamp (green)

The lamp goes on green when the modular server is powered on.

2POWER/SLEEP switch

The switch is intended to turn on or off the power of the modular server itself.

Pressing the switch for 4 seconds or longer causes the power supply to be turned off forcibly.

3DISK ACCESS lamp (green)

The lamp indicates access status of hard disk drive.

4STATUS lamp (green/amber)

The lamp indicates the status of the modular server. See "Lamp Indications" described later for the indications and meanings of the lamp.

5DUMP (NMI) switch

Press this switch to run the memory dump. Not used in usual operation.

6UID (Unit ID) lamp (blue)

The lamp is intended to identify the modular server in the system. The lamp is lit by a switch or software command.

When the recognize command is received from software, the lamp blinks. If you press the ID switch, the lamp goes on.