Configuring Your Modular Server 4-25

Exit

The following describes each option on the Exit menu:

Exit Saving Changes

Select this item to quit SETUP after saving the newly selected information in CMOS (non-volatile memory). The selection of "Exit Saving Changes" causes the confirmation screen to appear.

If you select "Yes", SETUP is terminated with the newly selected information saved in CMOS (non- volatile memory). Then the modular server automatically reboots the system.

Exit Discarding Changes

Select this item to quit SETUP without saving the newly selected information in CMOS (non- volatile memory).

Selecting "No" allows SETUP to be terminated without storage of the modified information. If you select "Yes", SETUP is terminated with the modified information saved in CMOS. Then the modular server automatically reboots the system.

Load Setup Defaults

Select this item to return all the values of SETUP to the default values. Selecting "Load Setup Defaults" causes the confirmation screen to appear.

Select "Yes" to return the values to the default values. Select "No" to go back to the Exit menu screen.

IMPORTANT: The factory-set values of SETUP may be different from their default values depending on the model of the modular server. It is necessary to set the values meeting the environment in which the modular server is used referring to the models.

Load Custom Defaults

Select this item and press Enter to load the stored custom default values. This menu does not appear when no custom default values are stored.

Save Custom Defaults

Select this item and press Enter to save parameters set currently as the custom default values. After the storage, the Load Custom Defaults menu appears.