Troubleshooting
Problems with NEC EXPRESSBUILDER
When the modular server is not booted from the NEC EXPRESSBUILDER DVD, check the following:
Did you set the NEC EXPRESSBUILDER during POST and restart the modular server?
→If you do not set the NEC EXPRESSBUILDER during POST and restart the modular server, an error message will appear or the OS will boot.
Is BIOS configuration correct?
→The boot device order may be specified with the BIOS SETUP utility of the modular server. Use the BIOS SETUP utility to change the boot device order to boot the system from the optical disk drive first.
<Menu to check: [Boot]>
Is the connected Flash FDD or inserted floppy disk formatted?
→Make sure that the Windows recognizes that the connected Flash FDD or inserted floppy disk is formatted. If not, format it.
Problems with NEC ESMPRO
→For detailed explanations on NEC ESMPRO, refer to the online document stored in the NEC EXPRESSBUILDER DVD that comes with your