1-6 Notes on Using Your Modular Server

„The modular server can be powered on by pressing the POWER/SLEEP switch or using the remote power-on feature from the management PC. In either case, you must wait for at least 5 seconds before performing power-on operation (after the modular server is inserted into Module Enclosure, or after the power is supplied to the Module Enclosure).

If power-on operation is performed within 5 seconds, you may fail to power on the modular server. In such a case, make sure that the power is supplied to the modular server, then press the POWER/SLEEP switch to turn on the power.

„Remove a modular server after turning off the power of the modular server.

„Do not perform any of the following operation during POST (including similar operations from external applications).

–Press the POWER/SLEEP switch of the modular server.

–Remove the modular server from the Module Enclosure.

–Disconnect the power cords from EcoPowerGateway and the power unit of the Module Enclosure.

Optional memory, hard disk drive, and other electronic components

„These components are extremely sensitive to static electricity. Make sure to touch the metal frame of the equipment to discharge static electricity from your body before handling the components. Do not touch the terminals or parts on the components by a bare hand and place the components directly on the desk.

„Make sure that the options are NEC-specified optional devices for the modular server. Even if an option can be installed or connected to the modular server, the option may not operate properly and further the modular server itself may be defected. If such an option causes the modular server to be defected or damaged, you will be charged for the repair within the warranty period.

„Do not give excess shocks or vibrations to the hard disk drive. Failure to follow it may cause the hard disk drive to be defected.

„The internal option device contains precision component that is easily affected by drastic temperature change. If the device is used after storage or relocation, make sure that the device is fully adapted to the operating environment.

„Turn off the cellular phone or pager. Radio interference may cause malfunctions of the modular server.