Setting Up Your Modular Server 3-13

4.Hold the lock lever and pull the modular server out from the Module Enclosure. Pull out approximately 10 cm so that you can hold the top and bottom of the frame of the modular server.

Lock lever

IMPORTANT: Do not hold the lock lever. Doing so may cause the Modular Server to fall down or be damaged due to deformed lock lever.

5.Hold the top and bottom of the frame of the modular server, and take the Modular Server out from the Module Enclosure.

6.Put the modular server on the clean, rigid and flat desk. Tighten the thumbscrew to lock the modular server.

Lock lever