Maintenance 6-7

RELOCATING/STORING THE SERVER

Follow the procedure below to relocate or store the modular server, hard disk drive, and Module Enclosure:

WARNING

Observe the following instructions to use the equipment safely. Failure to follow these instructions may result in death or serious personal injury. See pages 1-2 to 1-6 for details.

■Do not disassemble, repair, or alter the equipment.

■Do not remove the lithium battery.

■Disconnect the power plug before working with the equipment.

CAUTION

Observe the following instructions to use the equipment safely. Failure to follow these instructions may cause a fire, personal injury, or property damage. See pages 1-2 to 1-6 for details.

■Do not install the equipment in any place other than specified.

■Do not connect/disconnect any interface cable with the power cord of the server plugged to a power source.

IMPORTANT:

„If the equipment needs to be relocated/stored due to a change in the floor layout to a great extent, contact your service representative.

„Be sure to make a backup copy of your valuable data in the hard disk drive, if any.

„Make sure not to apply a shock to hard disk drive if installed on modular server.

„Store the equipment under the storage condition (temperature: –10

to 55°C, humidity: 20 to 80%, without condensation) to allow internal devices and the equipment to operate correctly in the next operation.