Nortel Networks 53r 5300 00 manual Mount the hardware, Mounting the server, Prerequisites

Mount the hardware 23

Table 6

IBM x3550 hardware characteristics (cont’d.)

Item	Description
Server identification	x3550, Model 7978 AC1
CPU	2 x Quad-Core Intel Xeon processor E5420, 2.5GHz, 12 MB L2 cache,
	1333MHz FSB, 80w
Memory	8 GB PC2-5300 CL5 ECC DDR2 Chipkill FB DIMM 667MHz
Disk	2 x 73 GB 3.5-inch SAS, 15000 RPM, hot swap; RAID-1 mirrored using
	IBM ServeRAID 8k-l SAS controller (hardware RAID-1)
AC power	2 x 670W A/C Power Supply (redundant, hot-swap); 2.8m, 100-240V,
	C13 to IEC 320-C14 (WW) rack power cable
DC power	2 x 670W D/C Power Supply (redundant; hot swap); 2.8m, 100-240V,
	C13 to IEC 320-C14 (WW) rack power cable
Remote management	Remote Supervisor Adapter II (RSA-II) Slimline with external RJ-45
	Ethernet port (internal PCI card)
Optical drive	DVD/CD-RW
Cooling	Two fans per CPU, one fan per power supply
Networking	2 x 10/100/1000 Mbps
Serial	COM1, DB-9
Rail kit	Pizarro (Nortel-specified)

Mount the hardware

The AS 5300 server requires the Pizzaro rail kit for rack-mount installations.

Mounting the server

Use this procedure to mount the physical server into a server rack.

Prerequisites

•You require a Pizzaro rail kit for each IBM x3550 server being installed.

Procedure Steps

Step Action

1Adjust the rail kit to fit in the frame. To properly support the server, each rail must be mounted to the outside of the front and rear of the frame.

2Adjust the left and right rails by sliding the rear mounting bracket to fit the frame.

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks