48Platform software installation
Prerequisites
•You have completed the steps described in "Configuring the networking, serial console redirection, and time zone settings" (page 45).
•External time source IP address(es), if applicable.
•Remote syslog server IP address, if applicable.
Procedure Steps
Step Action
1During the Linux installation process, the system displays the following prompt:
Please indicate the Clock Source function of this server:
2Select the clock source.
If you are... | Select... |
|
|
Installing an EMS1 server | Option 1 |
|
|
Installing an EMS2 server | Option 2 |
|
|
All other SIP core servers | Option 3 |
|
|
3Configure the clock source.
For more information about configuring the clock source for EMS1 and EMS2 servers, see .
For more information about configuring the clock source for all other SIP core servers, see .
4The system displays the following prompt:
Do you wish to configure a Syslog Server IP Address (Y/N) [N]?
5Do one of the following:
Select N to not configure the syslog server IP address.
OR
Select Y to configure the syslog server IP address. If you select this option, enter the syslog server IP address.
The system displays the following prompt:
Do you wish to enable system audit? (Y/N) [N]?
6Do one of the following:
Select N to not enable system audit.
OR
Application Server 5300
Nortel AS 5300 Installation
4 November 2008
