Nortel Networks 53r 5300 00 manual Applying the Linux Maintenance Release

92Maintenance Releases

The load name listed for each instance is the patched load.

--End--

Upgrading the AudioCodes gateway

Use this procedure to apply the Maintenance Release upgrades to the AudioCodes gateway. The only supported method for the AS5300 AudioCodes deployment of loads and upgrades must be done by the SunFire V-215 EMS servers.

Attention: The AudioCodes gateway does not have the capability to switch its activity to another instance. Upgrading an AudioCodes gateway causes service loss and all calls connected through that gateway are dropped.

Procedure Steps

Step Action

1From the EMS MG Tree pane, select the AudioCodes gateway to be upgraded. The Info pane and the Status pane now display the AudioCodes gateway.

2From the Info pane, selectSoftware Upgrade. The Files Manager screen is displayed.

3Select the appropriate software (CMP) to be downloaded and click OK in the Files Manager screen. A Question screen is displayed.

4From the Question screen, selectSystem Reset Upgrade and click Yes.

The selected software (CMP) is downloaded to the AudioCodes gateway, and the AudioCodes gateway is reset.

--End--

Applying the Linux Maintenance Release

Use this procedure to apply the Maintenance Release for the Linux operating system.

Prerequisites

•Linux is installed on the system.

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks