Nortel Networks 53r 5300 00 manual Prerequisites

Configuring the Primary (EMS1) and Secondary (EMS2) clock source servers 49

Select Y to enable system audit. Enabling the system audit might impact system performance.

The system displays a validation summary of the current configuration settings.

7Do one of the following:

Type Y to confirm the configuration settings and continue with the Linux installation process.

OR

Type N to go back through the individual configuration steps and make changes.

After you confirm the settings, the installation process continues.

--End--

Configuring the Primary (EMS1) and Secondary (EMS2) clock source servers

Use this procedure to configure the primary and secondary clock source servers.

Prerequisites

•You selected option 1 or 2 at the Clock Source function prompt.

Procedure Steps

Step Action

1Do one of the following:

Select E to use an external clock source (recommended).

OR

Select I to use an internal clock source (not recommended). If this option is selected, proceed to step 4.

2Enter the number of external clock sources to reference (1-10).

3Enter the IP addresses of the external clock source servers. The system displays the following prompt:

Enter the MACHINE Logical IP Address of the <Primary/Secondary> Clock Source Server

4If you are configuring the Primary (EMS1) server, enter the machine logical address of the Secondary (EMS2) server.

OR

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks