Nortel Networks 53r 5300 00 manual AS 5300 initial software deployment

66AS 5300 software deployment

Attention: For increased security, do not store the parameters for db.username and db.password in the installprops.txt file. If these parameters are not specified in the installprops.txt file, the mcpInstall.pl script prompts for them. This information is then encrypted and written to another file that is used by all of the scripts in the /var/mcp/install directory.

For new system installations, the db.username parameters must satisfy the following restrictions:

•is between 6 and 30 characters (inclusive) in length

•starts with a letter [a-z] [A-Z]

•only contains the characters [0-9] [a-z] [A-Z] and “_”

For new system installations, the db.password parameters must satisfy the following restrictions:

•is between 15 and 30 characters (inclusive) in length

•starts with a letter [a-z] [A-Z]

•contains at least two digits [0-9]

•contains at least two ‘_’

•does not contain the associated DB username

•only contains the characters [0-9] [a-z] [A-Z] and “_”

AS 5300 initial software deployment

This section contains information on deploying AS 5300 software.

AS 5300 initial software deployment procedures

The following work flow shows the sequence of procedures required to deploy AS 5300 software.

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks