Configuring the NTP, Syslog, and Audit Daemon settings 47

Disable the serial console redirection by selecting option 3 and proceed to step 12.

OR

Enable system console redirection by selecting option 1.

The system displays the following prompt:

Please select the speed of the serial port:

11From the list of port speed options, select the speed that best matches the speed used on the equipment attached to the RS-232 serial cable.

The system displays the following prompt:

Enter Region (1-62):

12Enter the number that best represents the geographic region of the server.

Not all regions from the first level will have second-level choices defined.

If a second-level choice is defined for the geographic region, the system displays the following prompt:

Enter Timezone Selection for Region (0, 1-<xx>):

13Enter the number that best represents the time zone of the server.

The system displays a summary of the current configuration settings.

14Do one the following:

Type Y to confirm the configuration settings and continue with the Linux installation process.

OR

Type N to repeat the previous configuration steps and make changes.

--End--

Configuring the NTP, Syslog, and Audit Daemon settings

This phase of the Linux operating system installation configures the following items:

Network Time Protocol settings

Syslog configuration

Audit Daemon configuration

Application Server 5300

Nortel AS 5300 Installation

NN42040-300 01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks

Page 47
Image 47
Nortel Networks 53r 5300 00 manual Configuring the NTP, Syslog, and Audit Daemon settings, Enter Region