Panasonic AJ-HPM110E, AJ-HPM110P Playing Back Play Lists, 2 Press the MENU button, [REPLACE TC] – [REPLACE], 1 Open the play list screen, Setting the Playback Time Code (TC)

Playing Back Play Lists

Setting the Playback Time Code (TC)

During play list playback, you can select whether the time	5 Use the cursor buttons to choose [SETTING] –
code should be replaced and output as a continuous value or	[REPLACE TC] – [START TC] and press the SET
the time code of each clip should be output. You can set the	button to enter the start time code.
time code start value when it is replaced at output.
1 Open the play list screen.
2 Press the MENU button.
3 Use the cursor buttons to choose [SETTING] –
[REPLACE TC] – [REPLACE].

4 Select [ON] and press the SET button.

This replaces the playback time code.

◆NOTE:

•When [OFF] is set, the time code is not replaced, instead the time code of each clip is output.

•When [OFF] is set, go to step 7 and end setup.

The initial value of the start time code is 00:00:00:00 when

replaced.

6 Use the cursor buttons to choose [SETTING] – [REPLACE TC] – [DROP FRAME]. Then press the SET button and select [DF] (drop frame) or [NDF] (non drop frame).

◆NOTE:

•A [DF] setting cannot be made at 24PN.

•[DROP FRAME] does not appear when 50, 25 or 60-25 is selected in setup menu No. 25 SYSTEM FREQ.

7 Press the MENU button to end setup.

100 Using Play List: Playing Back Play Lists