Press the MENU button.
Open the thumbnail screen.
Insert a P2 card
1
2
7 Select the number of the source P2 card slot and press the SET button.
Selecting ALL SLOT will result in a batch export of all cards.
3
4
5
6 Use the cursor buttons to choose [HDD] – [EXPORT].
Switch to the USB host mode.
Connect a USB hard disk.
If the hard disk has not been formatted by this unit, use this unit to format it.
select [YES] and press the SET button. This starts hard disk formatting.
Exporting to a Hard Disk in Card Units
A TYPE S hard disk allows you to export data to a hard disk (by writing data from a P2 card to a hard disk) in P2 card units. First use this unit to format the hard disk. Up to 23 cards can be exported to a hard disk.
The exported data from a P2 card is recognized as a separate drive on a computer.
When the confirmation message appears again,
7
8 Select [YES] and press the SET button.

This starts exporting.

◆ NOTE:

• A progress bar appears during exporting.

• To interrupt exporting, press the SET button, select [YES] in the cancel confirmation screen and press the SET button again.

• The export operation will end earlier if the verify setting is not engaged.

To turn off this setting, choose [HDD] – [SETUP] – [VERIFY] – [OFF].

• Copying of a P2 card that is interrupted during verification will still be successful.

• To export data to the specified folder when the hard disk is connected to a PC running under Windows, use the drive mount converter that you can download freely from the following web site. You may use the drive mount converter when there is un invisible partition because the drive overlaps an already assinged network. https://eww.pavc.panasonic.co.jp/pro-av/

When the export operation ends, “COPY COMPLETED!” appears.

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk

Cards Memory SD/SDHC and Connectors USB Using

107