Panasonic AJ-HPM110E, AJ-HPM110P manual OPERATION

OPERATION

This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected, PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.

* An underlined setting indicates an initial value.

	Item	Setting
				Settings and brief function description
FR	SUPER	FR	SUPER
No.	DISP.	No.	DISP.
		0000	DIAL	Specifies method for transferring to the search mode (search dial operation).
100	SEARCH ENA	0001	KEY	0: Press the STILL button or turn the search dial to engage search dial operation.
				1: Press the STILL button to engage search dial operation.
		0000	×8	Sets the maximum shuttle speed operation.
		0001	×16	0: 8× normal speed
101	SHTL MAX	0002	×32	1: 16× normal speed
		0003	×60	2: 32× normal speed	Setup
		0004	×100	3: 60× normal speed
				4: 100× normal speed
		0000	×32	Sets the maximum speed of FF and REW operation.
		0001	×60	0: 32× normal speed
		0002	×100	1: 60× normal speed
		0003	SEEK	2: 100× normal speed
102	FF.REW MAX			3: Seek operation to start of clip
				NOTE:
				• When SEEK is selected, FF and REW operations for FF and REW commands
				transferred via 9P and 1394 are performed at 100× normal speed.
				• The seek operation is available in playback mode.
		0000	CLIP	Specifies where a NEXT (SHIFT+FF) and PREV (SHIFT+REW) seek operation moves to.
		0001	CLIP&T	0: The start of the clip
103	SEEK SEL			1: The start of the clip or video text memo
				NOTE:
				This setting is not available during FF and REW operation.
		0000	OFF	Selects whether or not a warning should appear when REF.VIDEO is not connected.
104	REF ALARM	0001	ON	0: Displays no warning
				1: Flashes the STOP lamp to warn
		0000	0	Sets PLAY delay time in frame increments.
108	PLAY DELAY
		0015	15
		0000	EE	Specifies whether to invoke the EE mode or playback mode when STOP is pressed.
		0001	PB	0: EE mode
122	STOP EE SEL			1: Playback mode
				NOTE:
				During IEEE1394 signal input, the EE mode is invoked regardless of this menu setting.

Setup: Item Settings 125