Panasonic AJ-HPM110E, AJ-HPM110P Clips, Editing, List Play Using, press the SET button, [APPEND SELECTED CLIP], 4 Press the MENU button, 2 Open the play list screen

Audio Channel Replacement During	Registering Events for Selected
Editing	Clips

Follow the steps below to replace audio channels after event registration.

1 Select one or multiple events whose channels you want to replace in the play list screen.

2 Press the MENU button, use the cursor buttons to choose [SETTING] – [AUDIO CH] and press the SET button.

3 Select the channels that will be replaced.

Example: Make the following registration to switch CH1

and CH2 locations.

[AUDIO CH]-[CH1]=CH2

[CH2]=CH1

[CH3]=CH3

[CH4]=CH4

◆NOTE:

•Select [SETTING] – [AUDIO CH] – [RESET] to return channel settings to their factory defaults.

4 Press the MENU button, use the cursor buttons tochoose [OPERATION] – [EDIT AUDIO CH] andpress the SET button.

Then select [YES] to switch channel locations.

◆NOTE:

•A channel switch is indicated by “EDITED” in the A CH field. The status after the switch also shows up in the event property.

➝For details, refer to “Viewing Event Information” (page 98).

Use the following procedure to add selected clips to the play list. This operation registers the start of a clip as the IN point and its end as the OUT point.

1 Select the clip you want to register in the play list from the thumbnail screen.

2 Open the play list screen.3 Use the cursor buttons to select the location where you want to add the clip.4 Press the MENU button.5 Use the cursor buttons to choose [OPERATION] –[APPEND SELECTED CLIP].

List Play Using

Using Play List: Creating Play Lists 75