Importing Data from the Hard Disk to a P2 Card

Importing Data in Partition units from TYPE S Hard Disks and P2 Store

You can import (loading data from a hard disk to a P2 card) data in partition units (card units) at high-speed to a P2 card that has the same capacity as the source card.

1 Insert the P2 card to which the data will be imported.

2 Open the P2 thumbnail screen.

3 Press the MENU button.

4 Use the cursor buttons to select [HDD] – [EXPLORE] and press the SET button.

5 Select the partition that will be copied and press the SET button.

6 Press the MENU button.

7 Use the cursor buttons to choose [OPERATION] – [IMPORT] – [ALL CLIP] and press the SET button.

Importing Data to a P2 Card in Clip Units

You can select a hard disk clip and import it to a P2 card.

1 Insert the P2 card where the data will be imported to.

2 Open the hard disk thumbnail screen.

3 Press the MENU button.

4 Use the cursor buttons to select [HDD] – [EXPLORE] and press the SET button.

5 Select the partition that will be copied and press the SET button.

6 Select a clip to copy.

7 Press the MENU button.

8 Use the cursor buttons to choose [OPERATION] – [IMPORT] – [SELECTED CLIPS].

9 Select the number of the P2 card slot that will import the data and press the SET button.

10 Select [YES] and press the SET button.

This starts importing.

When the import operation ends, the message “COPY

COMPLETED!” appears.

8 Select the number of the P2 card slot where the formatted P2 card resides to which the data will be imported and press the SET button.

9 Select [YES] and press the SET button.

This starts importing. When the import operation ends,

“COPY COMPLETED!” appears.

◆NOTE:

•When data is imported to a P2 card that differs from the original P2 card, some clips may become incomplete ( ! indicator). Then use the reconnection function to rebuild the clip. Refer to “Reconnecting Incomplete Clips” (page 54).

•A menu setting allows you to turn verification during copying on or off.

◆NOTE:

•Verification is not performed when an entire clip is imported.

•The operation of “importing data in clip units” is almost the same as that of “copying clips.”

➝For cautions to be observed when importing data in clip units, refer to “Copying Clips” (page 52).

110 Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk