Panasonic AJ-HPM110E, AJ-HPM110P Control Reference Guide, Introduction, 1. POWER switch, Audio and Video Controller, 3. AUDIO MONITOR SELECT button, 2.METER (FULL/FINE) selector button

Control Reference Guide

Audio and Video Controller

24	22	20	18		16	14
23		21	19	17	15	13	12		11
1
2							CONTROL		PC
							REMOTE
3							LOCAL
							3	4	10
							1 3	2 4
4							1	2
							UNITY	UNITY
5								10
6								0
								10
								20
								30
							CH		CH
							1/3		2/4
								PB

Headphones connector
	8		9
7
1. POWER switch		3. AUDIO MONITOR SELECT button

Introduction

Turns the power on and off.

2.METER (FULL/FINE) selector button

Switches the scale of the audio level meter.

FULL mode:	Selects the standard scale
	(– ∞ to 0 dB range)
FINE mode:	Selects a scale divided into 0.5 dB
	increments.
	“	” indicates reference level (as
	set in setup menu) on a scale
	divided into 0.5 dB increments.

Switches the audio signals to be output to the MONITOR L/R connectors and the headphones jack. Each press of the button switches the output signals to the MONITOR L/R connectors and the headphones jack as described below.

When the METER	[CH1 / 2]➝[CH3 / 4]➝
SELECT switch is set to	[CH1 / 1]➝[CH2 / 2]➝
CH 1 to 4:	[CH3 / 3]➝[CH4 / 4]➝
	[CH1+2 / 1+2]➝
	[CH3+4 / 3+4]
When the METER	[CH5 / 6]➝[CH7 / 8]➝
SELECT switch is set to	[CH5 / 5]➝[CH6 / 6]➝
CH 5 to 8:	[CH7 / 7]➝[CH8 / 8]➝
(selectable only with HD	[CH5+6 / 5+6]➝
format)	[CH7+8 / 7+8]

The L/R lamps in the audio level meter indicate which signal is selected.

Introduction: Control Reference Guide 17