Panel Control Unit and Card Slots

1

6

OFF ON

CARD LOCK

2

1.9-inch Color LCD Monitor

Thumbnail screens facilitate video searches and checks.

2.Card Lock

This lever locks the cards in place when the top panel is closed. Set the lever to ON before closing the top panel.

3.P2 Card Access LEDs

These LEDs indicate P2 card status.

➝For details, refer to “P2 Card Access LEDs and P2 Card Status” (page 35).

4.P2 Card Slots

Insert P2 cards into these slots.

Firmly insert the card until the EJECT button pops out. After inserting a card, fold the EJECT button downward.

5.EJECT button

Use this button to remove a P2 card inserted in a P2 card slot. Raise the button and press it in firmly. Do not use the EJECT button when a P2 card access LED flashes orange.

➝For details, refer to “P2 Card Access LEDs and P2 Card Status” (page 35).

10

9

8

7

6

3 4 5

6.Stereo speakers

Outputs the audio monitor sound.

7.LEVEL control

Adjusts the sound volume of the internal speaker and headphones.

8.BRIGHTNESS control

Adjusts the brightness of the LCD monitor.

However, it cannot adjust the brightness of time codes and other superimposed indications.

9.BACKLIGHT switch

Switches the brightness of the LCD panel backlight as shown below.

LIGHT:

Bright

 

 

DARK:

Dark

 

 

OFF:

Turns the LCD off

 

 

10.SUPER switch

Switches the super output as follows.

ON:

Outputs the time code and other

 

superimposed information to the LCD

 

monitor and monitor output image.

 

 

OFF:

Does not output any superimposed

 

information.

 

 

24 Introduction: Control Reference Guide