Panasonic AJ-HPM110E, AJ-HPM110P Other input/output

Other input/output

Time code input: BNC × 1, 0.5 V[p-p] to 8.0 V[p-p], 10 kΩ

Time code output: BNC × 1, 2.0 V[p-p] ±0.5 V[p-p], low impedance

RS-422A input/output:

D-sub 9pin, RS-422A interface

IEEE1394 input/output:

	IEEE1394 6pin × 1
	400/200/100 Mbps selectable
	Complies with IEEE1394-1995
	Complies with IEC61883-Part1,Part2
	Complies with SMPTE 396M
	AV/C Command Set supported
USB 2.0:	Host × 1, Device × 1

Inrush current, measured according to European standard EN55103-1: 20.5 A

166 Specifications

Mass and dimensions are approximate values.

Specifications are subject to change without notice.

Contents

Operating Instructions Memory Card Portable Recorder/Player Model No. AJ-HPM110P AJ-HPM110P Model No. AJ-HPM110E AJ-HPM110E DEUTSCH Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM Read this first CAUTION: WARNING: This apparatus can be operated at a voltage in the range of 100 – 240 V AC Voltages other than 120 V are not intended for U.S.A. and Canada IMPORTANT <For USA-CaliforniaOnly FCC NOTICE (U.S.A.) Caution for AC Mains Lead Page Contents Introduction Clip Management Using Play List Using USB Connectors and SD/SDHC Memory Cards Setup For Long and Trouble-Free Operation Page Accessories Opening and Closing the Top Panel Opening the Top Panel Closing the Top Panel Introduction Features ◆ NOTE: Page Control Reference Guide 4.METER SELECT switch 5.INPUT SELECT buttons 6.AUDIO REC VOL SEL switch 7.POWER indicator 9.Audio playback level controls 15.REC button 16.REW/PREV button 20.TCG switch 21.COUNTER button 17.STILL/PAUSE button 24.TEXT MEMO/MARKER button GUI Operations 1.PLAY LIST button 2.THUMBNAIL button 3.Cursor buttons 4.EXIT/CANCEL/PF button 5.MENU/DIAG button 6.IN/SLOT CLIP/PF1 button 7.TRIM–/SLOTSELECT– button 8.ENTRY/CLIP (LIST/PF2 button) 9.TRIM+/SLOT SELECT+ button 11.SHIFT button 12.GO TO/MOVE button 13.INSERT/DELETE button 14.SPLIT/PROP button 15.EVENT button Panel Control Unit and Card Slots 1.9-inchColor LCD Monitor 2.Card Lock 3.P2 Card Access LEDs 4.P2 Card Slots LCD Panel CTL VIDEO AUDIO CMPST ANALOG Rear Panel 1.SERIAL DIGITAL COMPONENT AUDIO and VIDEO IN/OUT connectors 2.IEEE 1394 digital input/output 4.ANALOG AUDIO IN connectors/impedance switches/CH2 input switches 5.Fan 7.DC IN socket 8.Remote control connector 9. TIME CODE OUT connector 10.TIME CODE IN connector 11.REF VIDEO IN connectors IEEE 1394 Digital Interface (This way) (Not this way) Side Panel 1.SD/SDHC Memory Card Slot 2.USB 2.0 connector (Type A) 3.USB 2.0 connector (Type B) Moving Between Screens and Menu Operations Menu Operations 2 1,4 1 Press the MENU button to open the menu 2 Use the cursor buttons to place the cursor on menu items 3 Press the SET button Using the On-screenKeyboard Recording, Playback and P2 Card Handling P2 Card Access LEDs and P2 Card Status Dividing clips over 4 GB in length Terminating Loop Recording Mode For the latest information on P2 cards and SD memory cards Connections Recording From a Variable Frame-RateCamera Recording HD SDI signals from camera output Variable Frame Rate-Recording Jog and Shuttle Operations Using the Search Dial Clip Management Thumbnail and Clip Management Thumbnail Screen Names and Functions 1. Display status 7. Thumbnail 2.Record mode 8.Clip no 16.P2 card slot number and hard disk drive status HDD 17.Status message Switching the Type of Information That is Displayed Setting Items to Display Attach a text memo to video you want to edit Change thumbnail display to text memo display Press the MENU button 5 Press the MENU button to end processing Thumbnail editing Selecting Clips Canceling a Selection Playing Back Clips Attaching Text Memos and Shot Marks Playing Back From Text Memo Location Deleting Text Memos Copying Clips Deleting Clips Repairing and Reconnecting Clips Viewing and Revising Clip Information 6 Press the MENU button or the EXIT button to end processing Revising Clip Metadata 1 Display clip metadata 3 Use the cursor buttons to move to the item you want to revise and press the SET button 4 Select [OK] after revising (or press the ENTRY button) Attaching Metadata to Clips Select Method for Recording the USER CLIP NAME COUNT Value Checking and Revising Loaded Metadata Deleting Metadata 4 Select [ON] and press the SET button Press the MENU button to end setup Record video on this unit Formatting P2 Cards Checking Card Status Displaying Card Status Information 1)Write protect mark 2)P2 card status 3) P2 card remaining memory (or memory used)/total memory 6)Card warning messages 4 Press the EXIT button to end processing Using Play List Play List Function Play List Screen Names and Functions 1.Display status 3.Total play list time 2.Play list 4.Time line display 7.Filename 8.Start TC 9.REMAIN(EXTRA) 10.P2 card slot status 14.Overwrite track indication Buttons Used in Play List Operations 2.SET/MULTI SEL button 4.▲▼ b a Cursor buttons 3. EXIT/CANCEL button 6. IN button 7.ENTRY button 9.OUT button 10.SHIFT button 11.+ / – button 12.TRIM + / – buttons A. DUB button 15.STILL/PAUSE button 16.REVIEW button 17.RESET button 20.DELETE button Stop Mode Setup 1 Open the play list screen 3 Use the cursor buttons to choose [SETTING] – [STOP MODE] 4 Select [RETURN] or [STAY] and press the SET button 5 Press the MENU button to end setup Creating Play Lists Audio Channel Replacement During Registering Events for Selected Editing Clips 3 Select the channels that will be replaced 6 Press the SET button Registering Events From Video 2,3 5,6 2 Enter the insert edit mode Importing and Adding to Existing Play List Files 4 Use the cursor buttons to choose [FILE] – [APPEND] 6 Select a file in the file import screen and press the SET button Saving Play Lists Page Editing Play Lists Changing Event IN and OUT Points 4 Register a new IN point 3,6 5 Register a new OUT point 6 Press the EVENT button to end the change operation Changing Event Order 2,34 2 Select the event you want to move and press the SET button 3 Use the cursor buttons to select a destination 4 Hold down the SHIFT button and press the GO TO button To Delete All Events Saving Events Use the cursor buttons to choose [FILE] – [SAVE] Select [YES] in the confirmation screen and press the SET button Deleting Play Lists Overwrite Editing of Play Lists Engaging Overwrite Mode Setting Tracks for Overwriting Registering the Overwrite Location Registering Audio and Video for Importing Revising P IN/P OUT while Viewing Video Revising R IN/R OUT while Viewing Video Revising in the Play List Screen Recalling Events Audio Split Editing Registering From Video 4,5,6 3 Press the INSERT button 4 Register an IN point 5 Register the audio split point Adding and Registering Audio Split Point (Changing Registered Point) 3,5 4 Register the audio split point 5 Press the EVENT button to end registration Trimming the Audio Split Point Cancelling an Audio Split Setting Hold down the SHIFT button and press the RESET button Simplified Voice-Over Selecting a Track for Recording Selecting Method for Connecting Audio IN and OUT Points Mixing Playback Sound Setting Output Voice During A DUB Voice-OverFrom Still Image Status 23,5 3 Find the location for the voice-over 4 Press the A.DUB button 5 Press the STILL button Displaying Voice-OverEvents 1)Play List 2)Timeline 3 Use the following procedure to change offset and duration Changing the Trimming of Audio Recording Location Viewing Event Information Event Review 2 Use the cursor buttons to select the clip you want to review 3 Hold down the SHIFT button and press the PLAYbutton Playing Back Play Lists Playing Back the Play List 4 Press the PLAY 2 Use the cursor buttons to select the event you want to start playback 3 Set the playback time code as necessary Creating New Clips From the Play List (Edit Copy) Using USB Connectors Connecting a PC to This Unit Using This Unit With a Hard Disk Hard Disk Types and Available Functions Switching to USB Host Mode 3 Use USB host mode operations Formatting Hard Disks 2 Select [USB HOST] in the confirmation screen and 1 Switch to the USB host mode Insert a P2 card Select the number of the source P2 card slot and press the SET button Use the cursor buttons to choose [HDD] – [EXPORT] Switch to the USB host mode Connect a USB hard disk Displaying Hard Disk Information (Explorer Screen) 3 Open the thumbnail screen 5 Use the cursor buttons to choose [HDD] – [EXPLORE] and press the SET button 1)Display status 2)Disk information Viewing Hard Disk Clip Information Importing Data in Partition units from TYPE S Hard Disks and P2 Store Importing Data to a P2 Card in Clip Units Using SD/SDHC Memory Cards Page External Remote Control Setup Procedure Indications during control of external devices Remote operation procedure Using the RS-422Ainterface Using the IEEE1394 interface Setup Unit Setup Automatic Loading of User Setting File at Power up Changing Settings Making changes using the PF buttons 1 Press the PF (EXIT) button 2 Press the PF button (1 to 3) required to bring up the item to change 3 Press the PF (EXIT) button to end changing settings Using a Lock to Protect the User Setting File Item Settings Page BASIC Page Page Page Page OPERATION Page INTERFACE TIME CODE Page VIDEO Page Page Page Page AUDIO Page Page DIF MENU CARD READ CARD WRITE FORMAT Time Code, User Bit and CTL Time code User bit Setting the internal time code Setting the external time code Reproducing the time code and user bit Page CTL Mode Superimpose Screen Display Position Display Characters Operating Mode List of Compatible Input and Output Formats Page Audio V Fade Function Audio Recording Channels Selection Condensation Maintenance Error Messages DIAG menu Opening the DIAG menu WARNING information display and WARNING information For Long Free Page Page Page Error information List of Shortcuts Page Updating the Firmware in This Unit Handling P2 Card Recording Specifications GENERAL VIDEO AUDIO Other input/output Menu index Panasonic Broadcast & Television Systems Company Unit Company of Panasonic Corporation of North America Panasonic Canada Inc Panasonic de Mexico S.A. de C.V P E