Panasonic AJ-HPM110E, AJ-HPM110P Audio V Fade Function, Setup, •When CUT is selected, •When AUTO is selected, •A clip created using the edit copy function on an AJ-SPD850

Audio V Fade Function

This section describes the differences between audio processing provided by setup menu No. 731 (PB FADE) settings. Setup menu No. 731 (PB FADE) settings make it possible to perform audio V fade or cut processing between clips and events during clip selection and playback or play list playback.

Described below are examples that illustrate the differences in processing.

These examples involve a clip that spans multiple P2 cards and a second clip generated by edit copy.

•A clip that spans multiple P2 cards or a clip that has been automatically divided and recorded on an 8 GB P2 card

Clip 1-1 Clip 1-2

Clip 1

•A clip created using the edit copy function on an AJ-SPD850

Event A Event B

Clip 2

Settings in setup menu No.731 allow you to play back the above two clips and do the following.

•When CUT is selected

Clip 1-1	Clip 1-2	Event A	Event B
Clip 1		Clip 2

Noise appears at the edit points.

•When AUTO is selected

Clip 1-1	Clip 1-2	Event A	Event B
Clip 1		Clip 2

V fade is performed instantaneously to remove noise.

V fade processing is performed automatically between clips and events.

The following items are not V fade processed.

•Clips that span multiple P2 cards

•Clips that have been automatically divided when using 8 GB or larger P2 cards

•1394 digital output signals are not fade processed.

Setup

Setup: Audio V Fade Function 149