Displaying Voice-Over Events

The voice-over appears in the play list screen as shown below.

1)

2)

1)Play List

•The voice-over is added to the line after an event with an audio start point.

•The “No.” column shows “EX*,” not an event number. •The “SLOT” column shows P2 card slot numbers storing

audio data (same as P2 card slots storing the play list).

2)Timeline

•Extended tracks are indicated in the “EXTRA” part. •Recorded channel numbers are also shown.

◆NOTE:

•Use the TRIM button to zoom in (+) and zoom out (–).

•When a card with a voice-over is not inserted (and NONE is indicated), play list files cannot be saved and EXTRA audio event cannot be deleted.

2 Select the event you want to change.

3 Use the following procedure to change offset and duration.

A normal event

EXTRA audio track

EXTRA

 

 

 

Change of OUT+ TRIM duration

audio track

 

 

 

 

 

 

 

 

 

 

 

 

 

EXTRA

Change of IN + TRIM audio start location

 

audio track

 

 

 

 

 

List Play Using

Changing the Trimming of Audio Recording Location

This function allows you to adjust the location of a voice-over

in frame increments (at 24PN in 4-frame increments).

1

4

23

1 Open the play list screen.

Change of

Hold down the IN button and press the

start

TRIM+ button or the TRIM– button. The

location:

start location is incremented or

 

decremented in frame increments (in 4-

 

frame increments at 24PN).

 

 

Change of

Hold down the OUT button and press the

end

TRIM+ button or the TRIM– button. The

location:

OUT point is incremented or decremented

 

in frame increments (in 4-frame

 

increments at 24PN).

 

 

4 Press the ENTRY button to finalize the change.

◆NOTE:

•Except for the ENTRY button, you can also use the SET button or move the cursor with the cursor buttons to finalize a change.

Using Play List: Simplified Voice-Over 97