Open the play list screen.
Adding and Registering Audio Split Point (Changing Registered Point)

You can add an audio split to an event registered in the play list and change the audio split point.

1

2

3,5

4

1

2 Use the cursor buttons to select the event where you want to add (or change) an audio split point.

3 Press the EVENT button.

This activates the event edit mode.

4 Register the audio split point.

Use the operation buttons or search dial to look for a location for an audio split point. Then hold down the SPLIT button and press the ENTRY button.

5 Press the EVENT button to end registration.

◆NOTE:

•Addition can take place even when the IN point is changed before step 4 or the OUT point is changed after step 4.

List Play Using

Trimming the Audio Split Point

You can change audio split points in frame increments (in 4-

3 Change the audio split point.

frame increments at 24PN).

 

3

 

1

Hold down the SPLIT button and press the TRIM+ button or the TRIM– button. The IN point is incremented or decremented in frame increments (in 4-frame increments at 24PN).

2 4

◆ NOTE:

• During trimming the split point is indicated in black numerals

1 Open the play list screen.against a yellow background in the event list display of the event list split screen.

2 Use the cursor buttons to select the event where you want to change an audio split point.

Using Play List: Audio Split Editing 93