Panasonic AJ-HPM110E, AJ-HPM110P manual MENU

	Item		Setting
FR	SUPER	FR	SUPER	Settings and brief function description
No.	DISP.	No.	DISP.

	0000	CH1+2 59.94Hz 50Hz only
	0001	CH3+4	Specifies the output channels when the audio signals are in 4-channel mode and output
890	DIF AUD OUT		in the DVCPRO (25 Mbps) format and a DV clip is played back.
			0: CH1 and CH2
			1: CH3 and CH4

MENU

This menu is used for menu settings.

* An underlined setting indicates an initial value.

	Item	Setting
				Settings and brief function description	Remarks
FR	SUPER	FR	SUPER			Setup
No.	DISP.	No.	DISP.
		0000	USER2	Specifies user files loaded in USER 1.	Setting available
		0001	USER3	0: Loads the contents of USER 2	for USER1 only
		0002	USER4	1: Loads the contents of USER 3
		0003	USER5	2: Loads the contents of USER 4
A00	LOAD			3: Loads the contents of USER 5
				NOTE:
				Pressing the MENU button when loading completes opens a
				confirmation screen. Press the SET button to store the setting. Press
				the EXIT button to discard the change and retain the setting.
		0000	USER2	Specifies the user file that saves USER 1 settings.	Setting available
		0001	USER3	0: Saved to USER 2	for USER1 only
		0002	USER4	1: Saved to USER 3
		0003	USER5	2: Saved to USER 4
A01	SAVE	0004	LOCKED	3: Saved to USER 5
				4: Appears when all user files are write protected.
				NOTE:
				• A user file in change prohibit status cannot be selected.
				• When all user files are in the change prohibit status, “LOCKED”
				appears and data cannot be saved.
		0000	OFF	Specifies which user files will be loaded into USER 1 and whether or	Setting available
		0001	USER2	not the USER 1 settings should be used in startup when the power is	for USER1 only
		0002	USER3	turned on.
A02	P.ON LOAD	0003	USER4	0: Operation is started with the settings of the previously set user file.
		0004	USER5	1: The content of USER 2 is loaded into USER 1.
				2: The content of USER 3 is loaded into USER 1.
				3: The content of USER 4 is loaded into USER 1.
				4: The content of USER 5 is loaded into USER 1.
		0000	OFF	Sets/releases the user file (USER2 - USER 5) lock mode.	Setting available
		0001	ON	0: Releases the lock. (File data can be changed.)	for USER2 to
				1: Lock is engaged. (File data cannot be changed.)	USER5 only
A03	MENU LOCK			NOTE:
				• USER 1 cannot be locked.
				• Files can be loaded from the SD memory card even if they are
				locked. The status after load operation depends on the setting
				defined by the loaded data.
A04	PF1 ASSIGN			Registers a setup menu item in the PF1 button.
A05	PF2 ASSIGN			Registers a setup menu item in the PF2 button.
A06	PF3 ASSIGN			Registers a setup menu item in the PF3 button.
A10	CARD READ			Select files from the four SD memory card files to load into the menu.	Setting available
				This function is available only to USER 1-5 (SYSTEM) and USER 1-5.	for USER1 only

Setup: Item Settings 139