Playing Back Clips

CONTROL

PC

REMOTE

 

 

LOCAL

 

 

3

4

 

1 3

2 4

 

1

2

 

UNITY

UNITY

 

 

10

 

 

0

 

1

10

 

20

 

 

30

 

CH

 

CH

1/3

 

2/4

 

PB

 

23

1 Open the thumbnail screen.

2 Use the cursor buttons to select the clip you want to play back.
3 Press the PLAY button

Playback starts from the clip the cursor is on.

After the clip at the cursor location has been played, subsequent clips are played back in order. When the last clip has been played, the thumbnail screen appears.

◆NOTE:

•There is no need to select (that is when the thumbnail appears inside a blue frame) a clip to play it back.

•The thumbnail display settings can be changed to play back only selected clips or play back only clips that contain text memos.

•Pressing the STILLbutton instead of the PLAY button shows a still of the first frame in the clip.

•A clip whose clip number is red cannot be played back.

•Pressing the REW button instead of the PLAY button results

in rewind playback, while pressing the FF results in fast forward playback.

•Pressing the STOP button during clip playback, stops playback and the thumbnail screen appears.

•When playback stops, the cursor moves to the clip played prior to stopping.

•Video and audio playback may be disrupted between clips of different formats (DVCPRO HD, DVCPRO50, DVCPRO/DV, AVC-Intra50*, AVC-Intra100*). This is normal and not indicative of a malfunction.

•Pressing the THUMBNAIL button to close the thumbnail screen will in most cases change the playback start position back to the clip with the oldest recording time (clip number 1).

•Changing the thumbnail screen to text memo display makes it possible to start play back from text memo location.

➝For details, refer to “Attaching Text Memos” (page 50). * Available when the optional AVC-Intra Codec board AJ-

YBX200G is installed

Management Clip

◆NOTE:

•The search dial can also move the cursor.

•Hold down the SHIFT button and press the REW/FF button or the

4/5 buttons to move the cursor to the first or last clip.

Playing Back Single Clips

To play back the clip at the cursor location, hold down the SHIFT button and press the PLAY button.

◆NOTE:

•The play list screen appears when playback stops at the

end of the clip or when the STOP button is pressed. The cursor then moves to the next clip.

•All buttons other than the STOP button are not available during single clip playback.

•Single clip playback starts from the beginning of the clip.

Clip Management: Playing Back Clips 49