◆NOTE:

•Input a reference signal when mixing SDI input audio.

•IEEE1394 input audio cannot be used for voice-overs.

Voice-Over From Still Image Status

6 4

1

23,5

1 Open the play list screen.

2 Use the cursor buttons to select the event where you want to perform a voice-over.

3 Find the location for the voice-over.

Use the operation buttons or the search dial to find a location for a voice-over and press STILL .

4 Press the A.DUB button.

This generates an A DUB PAUSE state while a still image is output at the still location.

5 Press the STILL button.

Press the STILL button again. After a 2-second auto reverse and a 2-second playback interval, sound recording starts.

Use the VR (audio volume) controls as necessary to adjust the playback sound level.

6 Press the STOP button to end the voice-over.

◆NOTE:

•When the 24PN play list format is set in setup menu No. 026 (PLY LST FMT), the audio IN and OUT points are set in 4-frame increments. If the recording starts or stops at some other points, the IN and OUT points are automatically corrected within the recording range.

Voice-Over From Playback Status

5 4 2

3

4

1

5

23

1 Open the play list screen.

Use the cursor buttons to select the event where you want to perform a voice-over.

Press the PLAY button to start playback at a location before the voice-over.Hold down the A.DUB button and press the PLAY button at the voice-over location.

This starts the audio recording.

Use the VR (audio volume) controls as necessary to adjust

the playback sound level.

Press STOP button to end the voice-over.

◆NOTE:

•When the 24PN play list format is set in setup menu No. 026 (PLY LST FMT), the audio IN and OUT points are set in 4-frame increments. If the recording starts or stops at some other points, the IN and OUT points are automatically corrected to fall within the recording range.

96 Using Play List: Simplified Voice-Over