5 Press STOP to return to the play list screen.

The registered IN and OUT points appear as R IN ▼

(green) and R OUT ▼ (pink) at the top of the timeline.

Registering Audio and Video for Importing

1 Find audio and video to import.

Press the INSERT button to find audio and video to import. Find audio and video to import in all clips in the matching format that will be played back.

2 Register an IN point.

Use the operation buttons or search dial to find the start location for audio and video insertion. Then hold down the IN button and press the ENTRY button.

3 Register an OUT point.

Use the operation buttons or search dial to locate the end of audio and video. Then hold down the OUT button and press the ENTRY button.

4 Press the EVENT button to return to the play list.

The registered IN and OUT point thumbnails and time

code appear as P IN and P OUT points below the timeline.

◆NOTE:

•Pressing the INSERT button will also return you to the play list screen.

•The IN and OUT buttons light when an event is registered and pressing the IN and OUT buttons display the time code of the IN and OUT points.

•Pressing the IN and OUT button simultaneously shows the interval between the two points. If an OUT point is not registered, it shows the duration from the IN point to the current location.

•Holding down the SHIFT button and pressing the IN and OUT buttons simultaneously will show the total time (TOTAL DURATION) for all events.

•Holding down the IN (OUT) button and pressing the RESET button will clear the registered point.

•Pressing the IN (OUT) + ENTRY buttons in the play list will

register the current playback location (yellow ) to R IN (R OUT).

•Pressing the IN (OUT) + GOTO buttons in the play list will move the playback location to the IN (OUT) point of the event at the cursor.

•The time code of the IN and OUT points of an EXTRA event becomes the time code of the video at that location after finalizing.

Temporary Registration and Revision of Events

When three IN and OUT points of the four IN and OUT points of the player and recorder are specified, or both IN points are specified, an event is created in unfinalized status. The event is shown in orange.

Overwrite edited events in unfinalized status can be revised.

◆NOTE:

•When only the two IN points are registered, the end of the clip automatically becomes the P OUT point.

•When the fourth point is specified after specifying three points, the registration point corresponding to the fourth point is automatically cleared.

Revising P IN/P OUT while Viewing Video

1 Press the INSERT button in the play list screen to display video.

2 Press the IN (OUT) + GOTO buttons or operation buttons and press the IN (OUT) + ENTRY buttons where the revision will be made to reregister.

You can perform fine adjustment (trimming) by hold down

the IN (OUT) button and pressing the TRIM (+/–) button.

◆NOTE:

•Holding down the IN (OUT) button and pressing the RESET button will clear the registered point.

88 Using Play List: Overwrite Editing of Play Lists