Panasonic AJ-HPM110E, AJ-HPM110P manual 126

	Item	Setting
				Settings and brief function description
FR	SUPER	FR	SUPER
No.	DISP.	No.	DISP.
		0000	OFF	Select whether recording and stopping should be performed automatically according to
		0001	TYPE1	the Recording Marks in the HD SDI input signals from Panasonic camera-recorders.
		0002	TYPE2	0: No automatic recording/stopping
				1: Recording and stopping is performed automatically according to the Recording Marks
				in the LTC information attached to HD SDI signals.
				2: Recording and stopping is performed automatically according to the Recording Marks
				in the SVITC information attached to HD SDI signals.
155	AUTO REC			NOTE:
				• Set the CONTROL switch to REMOTE. Refer to “Panasonic camera-recorders,
				recording formats and Recording Mark” on the next page before selecting TYPE1 or
				TYPE2.
				• Select TYPE1 or TYPE2. To start automatic recording, simultaneously press the REC
				button and the STILL button to place this unit in the REC PAUSE mode. This function
				will not work in any mode other than REC PAUSE. The unit returns to REC PAUSE
				mode when automatic stop is activated.
				• In normal recording mode, this setting is not available and auto stop is not activated.
		0000	OFF	Determines whether or not to engage repeat play during playback.
		0001	ON	0: Does not engage repeat play. Stops playback at the end of the last clip.
				1: Engages repeat play. Continues playback from the beginning when reaching the end
				of the last clip.
				NOTE:
160	REPEAT PLAY			• Repeat play is not available when the PLAYLIST button is on and during TEXT MEMO
				playback.
				• If the P2 card is removed during repeat play, playback is suspended when playback
				reaches the clip that is no longer exists.
				• Even if you insert a P2 card during repeat play, additional clips are not played back
				until you once stop repeat play and resume it.
		0000	NiCd12	Sets the battery type.
		0001	NiCd13	0: Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V)
		0002	NiCd14	1: Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V)
180	BATTERY SEL	0003	S-LION	2: Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V)
		0004	I-LION	3: Settings for 1 pc. lithium-ion battery (BP-L90A) (NEAR: 11.0 V, END: 10.6 V)
		0005	TYPE-A	4: Settings for 1 pc. lithium-ion battery (ENDURA80) (NEAR: 13.4 V, END: 10.6 V)
		0006	TYPE-B	5: Battery specified by menu No. 181 TYPE-A NEAR item and No. 182 TYPE-A END item
				6: Battery specified by menu No. 183 TYPE-B NEAR item and No. 184 TYPE-B END item
		0000	10.6	Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
				voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped.
181	TYPE-A NEAR	0023	12.9	NOTE:
				• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
		0044	15.0	when AC power is used.
				• A setting that is smaller than END cannot be made.
		0000	10.6	Specifies the voltage (in 0.1 V steps) when this unit will automatically power off because
				the voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has
182	TYPE-A END	0018	12.4	dropped.
				NOTE:
		0034	14.0	A setting that is larger than NEAR cannot be made.
		0000	10.6	Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
				voltage of a TYPE-B battery selected in menu No. 180 BATTERY SEL item has dropped.
183	TYPE-B NEAR	0023	12.9	NOTE:
				• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
		0044	15.0	when AC power is used.
				• A setting that is smaller than END cannot be made.

126 Setup: Item Settings