Panasonic AJ-HPM110E, AJ-HPM110P manual 129

	Item		Setting
FR	SUPER	FR	SUPER	Settings and brief function description
No.	DISP.	No.	DISP.

		0000	EXT_L	59.94Hz	50Hz	only
		0001	SLTC	Specifies the time code used when an external time code is used.
		0002	SVITC
				0: LTC of the TIME CODE IN connector
				1: LTC data attached to serial signal input to HD SDI IN
507	EXT TC SEL			2: VITC data attached to serial signal input to HD SDI IN
				NOTE:
				When SLTC and SVITC are set, the VITC in the input video signal is used when an
				analog composite or SD SDI input signal is selected. When 1394 is selected as the
				input signal, the IEEE 1394 digital input signal time code is used regardless of this
				setting.
		0000	000	Specifies user bit usage in time code generated by the TCG.
		0001	001	0: NOT SPECIFIED (character set not specified)
		0002	010	1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022)
		0003	011	2: UNASSIGNED 1 (undefined)
508	BINARY GP	0004	100	3: UNASSIGNED 2 (undefined)
		0005	101	4: UNASSIGNED 3 (undefined)
		0006	110	5: PAGE/LINE
		0007	111	6: UNASSIGNED 4 (undefined)
				7: UNASSIGNED 5 (undefined)
		0000	OFF	59.94Hz	50Hz	only
		0001	ON	Specifies whether or not LTC output from the TIME CODE OUT connector should be
509	PHASE CORR			phase controlled.
				0: No phase control
				1: Phase controlled

0000	OFF	59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz only
0001	ON	Sets the TCG CF flag.
510 TCG CF FLAG

0:OFF

1:ON

	0000	DF	59.94Hz 29.97Hz only
	0001	NDF	Sets the DF or NDF mode for CTL and TCG.
511	DF MODE

0:Uses drop frame mode.

1:Uses non-drop frame mode.

		0000	VOUT	59.94Hz 50Hz only
		0001	TC_IN	Specifies how the phase is switched for the time code output by the TIME CODE OUT
512	TC OUT REF			connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE
				mode)
				0: Synchronized with output video signal.
				1: Synchronized with the external time code input.
		0000	SBC	Specifies how to output VITC that will be superimposed on the SD output video signal.
		0001	VAUX	0: Outputs the time code recorded in the SBC area as VITC
513	VITC OUT			1: Outputs the time code recorded in the VAUX area as VITC
				NOTE:
				• VITC data detected in the input video signal is automatically recorded in the VAUX
				area during video recording.
		0000	OFF	Specifies whether or not VITC data will be superimposed on HD SDI output.
514	HD EMBD VITC	0001	ON	0: Not superimposed
				1: Superimposed
		0000	OFF	Specifies whether or not LTC data will be superimposed on HD SDI output.
515	HD EMBD LTC	0001	ON	0: Not superimposed
				1: Superimposed

Setup

Setup: Item Settings 129