Panasonic AJ-HPM110E, AJ-HPM110P manual VIDEO

	Item		Setting
FR	SUPER	FR	SUPER	Settings and brief function description
No.	DISP.	No.	DISP.

	0000	OFF	59.94Hz	50Hz	only
	0001	ON	Specifies whether or not the internal time code generator value should be recorded in the
			VAUX area.
			0: The internal time code generator value is not recorded.
			Record the time code value when it is superimposed on input video signals.
518	VITC GEN		1: The internal time code generator value is recorded.
			NOTE:
			• When 1394 is selected as the input signal, the time code signal superimposed on the
			compressed input signal is recorded regardless of settings in this menu.
			• When 23.98, 24, 29.97, 59-23, 60-24, 25, 60-25 is selected in menu No. 25 SYSTEM
			FREQ, the internal time code generator value is recorded as the time code in the
			VAUX area.
	0000	SBC	59.94Hz	50Hz	only
	0001	F_RATE
			Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors
			or user bits in the SBC area (DVCPRO HD only) output via the IEEE 1394 terminal during
519	UB OUT SEL		playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as optional AVC-
			Intra 1080/24PN, 30PN and 25PN clip formats.
			0: Outputs the user bits recorded in the SBC area.
			1: Outputs the frame rate information recorded in the VAVX area.
Definition of terms:
SBC (Sub Code Data) area:		This area, which is separate from video and audio data area on a P2 card, stores SMPTE/
		EBU compliant time code, recording dates and other information.
VAUX (Video Auxiliary Data) area:		An area in the video data on a P2 card that stores additional information on video data.

VIDEO

This menu is used for video settings.

					* An underlined setting indicates an initial value.
	Item	Setting
					Settings and brief function description
FR	SUPER	FR	SUPER
No.	DISP.	No.	DISP.
		0000	100%CB	Sets the internal signal type. SMPTE and ARIB signals are available in HD mode only
		0001	75%CB	(black in SD mode).
		0002	SMPTE	0: 100% color bar
601	VIDEO INT SG	0003	ARIB	1: 75% color bar
		0004	BLACK	2: SMPTE color bar
				3: ARIB color bar
				4: Black
		0000	DR OFF	59.94Hz	50Hz 29.97Hz 59-23Hz 60-24Hz 25Hz
		0001	DR ON	60-25Hz	only
				Specifies the method for processing HD SDI input. (Available only for DVCPRO HD)
602	SDI IN MODE			0: Records the 8 higher bits after rounding up the two lowest bits.
				1: Records the signal with 8 higher bits, obtained by dynamic rounding.

NOTE:

Records 8 high-order bit signals after rounding off the 2 low-order bits during SD SDI input.

130 Setup: Item Settings