Panasonic AJ-HPM110E, AJ-HPM110P 4)USB HOST, 1)Display status, 2)Disk information, 4 Press the MENU button, 3)Partition information, 5)Hard disk drive status, 2 Connect a USB hard disk

Displaying Hard Disk Information (Explorer Screen)

Use this function to view hard disk information.

1 Switch to the USB host mode.

2 Connect a USB hard disk.

3 Open the thumbnail screen.

4 Press the MENU button.

5 Use the cursor buttons to choose [HDD] – [EXPLORE] and press the SET button.

	3)
1)		5)
2)

4)

◆NOTE:

•Use the right and left cursor buttons to switch between date lists and partition names.

1)Display status

The name of the screen (HDD-EXPLORE)

2)Disk information

The following information appears.

Hard disk that	PARTITION:	TYPE S/
makes it possible		P2STORE
to read and write
	VENDOR:	Name of vendor
data by the card.
	MODEL:	Model name
	SIZE:	Size (unit: GB)
	USED:	Memory used
		(unit: GB)
		Used P2 card
		area (unit: cards)
		up to 23 cards
	REMAIN:	Remaining
		memory
		(unit GB)
Regular hard disk	PARTITION:	FAT/OTHER
	VENDOR:	Name of vendor
	MODEL:	Model name
	SIZE:	Memory used
		(unit: GB)

3)Partition information

➝Details are provided on the next page.

◆NOTE:

•The partition information for an invalid partition on a P2 store is indicated in gray.

•Only information for the primary partition is displayed for a hard disk that is formatted using FAT.

4)USB HOST

The USB host mode indicator

5)Hard disk drive status

Indicates whether or not a hard disk is connected and

hard disk type.

◆NOTE:

•To name a partition (up to 20 characters), choose [CHANGE PARTITION NAME] in the [OPERATION] menu in hard disk thumbnail screen.

108 Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk