Panasonic AJ-HPM110E, AJ-HPM110P CTL, SDI, SDI, VIDEO, AUDIO, AVC-I, 1394SG, 1394SG, SYSTEM, DVCPRO, 6.U lamp, LCD Panel, 1080i720p, CMPST ANALOG, Introduction, 1.Level meter

LCD Panel

6

		dB			dB				dB			dB
	4				0			4				0
	3							3
	2				-12				2			-12
1	1							1
		0			-20				0			-20
	-1								-1
	-2							-2
	-3				-30			-3				-30
	-4				-40			-4				-40
					-∞							-∞
			L	R		L	R			L	R		L	R

CTL

TC

UB

		VIDEO			AUDIO
		CMPST ANALOG				5
			SDI		SDI
		1394SG			1394SG
	U				SYSTEM	4
					59.9450
	1080i720p
DVCPRO					AVC-I	3
	HD			50

Introduction

1.Level meter

Indicates the level of audio signals for CH1, CH2, CH3 and CH4.

The input signal level of audio signals is indicated during recording and when EE is selected. During playback the meter indicates output signal levels. Use the METER selector button to switch the audio level display to FULL mode or FINE mode. Use the setup menu to change the reference level.

FINE mode				FULL mode
dB			dB
4			0			Reference level
3
2			-12
1
0			-20
-1
-2
-3			-30
-4			-40
	L	R		L	R

2.Counter display

This function shows the counter and time codes.

It displays CTL (relative position from the beginning), TC (read time code) and UB (user bit of the read time code).

3.Format display

Indicates the set record format and the format of video recorded on an inserted P2 card.

2

4.TV system display

Indicates the selected TV system. Use the SYSTEM setting in setup menu No. 25 SYSTEM FREQ to switch between 59.94 Hz, 50 Hz or other settings.

59.94: Lights when a 59.94 Hz system frequency is selected.

50:Lights when a 50 Hz system frequency is selected.

◆NOTE:

•When a frequency other than 59.94 Hz and 50 Hz is selected, also the SYSTEM indicator goes off.

5.INPUT SELECT display

Indicates selected VIDEO and AUDIO status. Except for analog audio signals, the indicator flashes when there is no input for the selected signal.

When SDI input is selected, this display flashes if the input signal is not compatible with the system format.

VIDEO

CMPST:	Analog composite video input signals
SDI:	Serial digital video input signals
1394:	IEEE1394 input signals
SG:	Internal reference signals
AUDIO
ANALOG:	Analog audio input signals
SDI:	Serial digital audio input signals
1394:	IEEE1394 input signals
SG:	Internal reference signals

6.U lamp

In the EE mode, this lamp lights when an input signal contains UMID information.

Lights during playback when the recording contains UMID information.

Introduction: Control Reference Guide 25