Quantizing: AVC-Intra100/AVC-Intra50: 10bits DVCPRO HD/DVCPRO50/DVCPRO/DV: 8bits

Video compression method:

AVC-Intra100/AVC-Intra50: H.264/AVC-Intra Profile

DVCPRO HD: DV base (SMPTE370M) DVCPRO50/DVCPRO/DV:

DV base (SMPTE314M)

Bit rate:AVC-Intra100/DVCPRO HD: 100Mbps AVC-Intra50/DVCPRO50: 50 Mbps DVCPRO: 25 Mbps

VIDEO INPUT

Analog composite input:

BNC × 1 (VIDEO IN), 1.0 V[p-p] (75 Ω)

Reference input: Automatic switching of black burst/HD 3 value SYNC, BNC × 1 (loop through × 1), automatic 75 Ω termination provided

SDI input: BNC × 1, complies with SMPTE 292M/ 296M/299M during HD SDI input, complies with SMPTE 259M-C/272M-A, ITU-R BT.656- 4 during SD SDI input

VIDEO OUTPUT

Analog component (switchable):

BNC × 3 (Y, PB, PR)

Y:1.0 V[p-p], 75 Ω during HD output mode

Analog composite output (switchable):

BNC × 3, video 1, video 2, video 3,

1.0V[p-p], 75 Ω during SD output mode

HD SDI/SD SDI output (switchable):

BNC×1, complies with SMPTE 292M/296M/ 299M during HD serial digital output, complies with SMPTE 259M-C/272M-A, ITU-R BT.656-4 during SD serial digital output

Monitor output: BNC × 1, 1.0 V[p-p], 75 Ω

VIDEO ADJUSTMENT RANGES

Video output gain: Can be set to -∞to +3 dB or -∞to 6 dB depending on menu

Video output chroma gain:

±3 dB

Video output HUE (chroma phase):

±30°

Video output setup level:

±14 IRE

Video output sync phase:

±15 µs

Video output SC phase:

±180°

Specifications

AUDIO

DIGITAL AUDIO

Sampling frequencies:

48 kHz (synchronous with video)

Quantizing: 16 bits

Frequency response:

 

20 Hz to 20 kHz ±1.0 dB

 

(at the reference level)

Dynamic range:

Better than 85 dB

 

(1 kHz emphasis off, “A” weighted)

Distortion:

Less than 0.1 %

 

(1 kHz, emphasis off, reference level)

Crosstalk:

Less than –80 dB

 

(1 kHz, between 2 channels)

Headroom:

18/20 dB selectable

De-emphasis:

T1 = 50 µs, T2 = 15 µs (auto on/off)

AUDIO OUTPUT

Analog output (CH1, CH2, CH3, CH4):

XLR × 4, low impedance, +4/0/–3/–20 dBu selectable

SDI output: BNC × 1, complies with SMPTE 292M/296M/ 299M during HD SDI input, complies with SMPTE 259M-C/272M-A (480/59.94i), ITU-R BT.656-4 (576/50i) during SD SDI input

Monitor output: Pin jacks × 2, –8 dBV, 600 Ω

Headphones: Stereo mini jack (3.5 mm diameter), 8 Ω, variable level

AUDIO INPUT

Analog input (CH1, CH2, CH3, CH4):

 

XLR × 4, 600 Ω/high impedance selectable

 

(factory setting: high impedance)

 

+4/0/–3/–20 dBu selectable

 

Only CH2 input can be switched between

 

LINE/MIC/MIC +48 V

MIC:

–60 dBu

MIC+48V:

Phantom +48V supported, –60 dBu

SDI input:

BNC × 1, complies with SMPTE 292M/296M/

 

299M during HD SDI input, complies with

 

SMPTE 259M-C/272M-A (480/59.94i), ITU-R

 

BT.656-4 (576/50i) during SD SDI input

Specifications 165