Panasonic AJ-HPM110E, AJ-HPM110P Viewing Hard Disk Clip Information, Display status, Disk information, 1)Display status, 2)Partition information, 2 Press the MENU button

Displaying Clip Thumbnails on a Hard Disk

You can display thumbnails and manage clips stored on the

hard disk in the same way as clips on P2 cards.

1 Open the explorer screen.

2 Use the cursor buttons to select the partition where you want to view thumbnails and press the SET button.

A thumbnail of the clip on the partition now appears.

VERIFY:	Verify setting and result at time of
	recording
	ON: FINISHED	Verification was
		successful
	ON: FAILED	Verification failed
	OFF	No verification
	* “--” is displayed on P2 store.
NAME:	User assigned partition names

			3) Record mode and system format
				Indicates the record mode and system format of the
				clip at the cursor location.
		4)		Disk information
				➝Details are provided on the previous page.
				◆ NOTE:
				• Press the EXIT button to return to the explorer screen.
				• Change the thumbnail screen display as necessary. These
				changes are performed in the same way as when using P2
	SET	EXIT		cards.
				➝For details, refer to “Changing Thumbnail Display” (page 45).
1)				• Hard disks formatted using FAT can handle up to 1000 clips.
				Any clips beyond that limit cannot be opened.
				• Use the TRIM+ / – buttons to move to thumbnail displays on
				previous and subsequent partitions.
				Viewing Hard Disk Clip Information
2)			You can view a variety of metadata on clips stored on a hard

4)

disk. The content is the same as that displayed by a P2 card clip property.

Cards Memory SD/SDHC and Connectors USB Using

3)

1)Display status

Indicates the status of thumbnails of hard disk clips.

2)Partition information

The following information appears.

SERIAL: P2 card serial number

MODEL:	P2 card model name
NUMBER	Partition number (1 -)
(No.):
DATE/	Date and time of partition recording
TIME:

1 Select a clip in the hard disk thumbnail screen.

Detailed clip information is displayed on the screen.

2 Press the MENU button.

3 Use the cursor buttons to select [PROPERTY] – [CLIP PROPERTY] and press the SET button.

➝For details, refer to “Viewing and Revising Clip

Information” (page 55).

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk 109