Playing Back the Play List

Use the following procedure to play back the play list.

4 Press the PLAY

button.

1

24

1 Open the play list screen.

2 Use the cursor buttons to select the event you want to start playback.

Playback starts from the cursor location and continues

until the end of the play list or until all playable events have

been played.

◆NOTE:

•During play list playback, insert all the P2 cards that contain events that belong to the play list or normal playback will not be possible. The number of the first and subsequent events that cannot be played back are indicated in red.

•Use the STOP button to stop ongoing playback.

•The default stop mode setting of this unit is RETURN. Thus you

return to the play list screen when playback is stopped by

pressing the STOP button or the automatic stop function stops playback upon reaching the beginning or end of all

events. The cursor position then moves to the event where the STOP button was pressed.

•If the menu stop mode is set to STAY, stopping playback does not return you to the play list screen but a still image is continuously displayed.

•If the menu stop mode is STAY, press the PLAY LIST button or the EXIT button after playback stops to return to the play list.

•Remote switching is available also during play list playback. The STAY stop mode is a convenient setting in remote control using RS-422A.

List Play Using

3 Set the playback time code as necessary.

➝For details, refer to “Setting the Playback Time Code (TC)” (page 100).

Using Play List: Playing Back Play Lists 101