14.A. DUB button

Use to make voice-overs and to copy to EXTRA.

➝For details, refer to “Simplified Voice-Over” (page 95).

15.STILL/PAUSE button16.REVIEW button

To review all events at the cursor position, hold down the SHIFT button and press the PLAY button. Playback starts 3 s before the IN point and stops 1 s after the OUT point.

Any unfinalized events are also previewed in the overwrite edit mode regardless of cursor location. Thus all unfinalized events are played back.

17.RESET button

17.RESET + 6.IN / 9.OUT / 22.SPLIT buttons

In the event register/edit screen or in the overwrite edit player/recorder screen, hold down the IN, OUT or SPLIT button and press the RESET button to delete the IN, OUT or SPLIT point of the selected event. (The SPLIT point is available also in the play list.) Pressing the RESET button when trimming R IN/OUT or P IN/ OUT point (SHIFT + IN/OUT) deletes the registered points.

10.SHIFT + 17.RESET buttons

In the play list screen, hold down the SHIFT button and press the RESET button to create a new play list file (fulfils the same function as [FILE] – [NEW]).

In the overwrite edit mode, the playback location (▼ in yellow) can be moved to the IN or OUT point of an event at the cursor location in the play list.

20.DELETE button

Use this button to delete events when the play list is displayed. Place the cursor on the event you want to delete and press the SET button to select it. Then hold down the SHIFT button and press the INSERT button to delete the selected event.

21.INSERT button

Insert editing in the insert mode allows you to enter new events between existing play list events. Place the cursor on the event you want to insert and press this button to engage the event register mode and insert the event while viewing the video of the event. During overwrite editing in the insert mode, you can select the overwriting segment while viewing the video of overwriting event (player side).

Press this button again or the EVENT button to return to the play list screen.

22.SPLIT button

10.SHIFT + 22.SPLIT buttons

Holding down the SHIFT button and pressing the SPLIT button in the play list displays detailed event information at the cursor.

For details on other operations, refer to the description of 7. ENTRY button, 12. TRIM+ / – button and 17. RESET button.

18.MOVE button

Use this function to move an event to another line while the play list is displayed. Use the SET button to select an event you want to move when the play list is displayed. Then move the cursor to the line you want to move the event to and press this button to move the selected event to the location right before the cursor.

19.GO TO button

19.GO TO + 6.IN / 9.OUT / 22.SPLIT buttons

Use these buttons in the event register/edit screen and in the overwrite edit player/recorder screen (the EVENT button blinks) to locate the IN, OUT and SPLIT points. During normal playback, still playback and other playback operations, hold down the IN (OUT or SPLIT) button and press the GO TO button to move to the IN (OUT or SPLIT) point and resume playback from there.

23.EVENT button

Use to open the event register/edit mode when the play list is displayed. At this time the screen shows video.

24.REC button

Use the REC button in the overwrite edit mode to finalize any unfinalized events. When there are no overwritten unfinalized events, the event at the cursor can be turned into an overwritten unfinalized event (recalled).

72 Using Play List: Play List Function